Anhui IFAGB Hardware Accessories Technology Co., Ltd.
Anhui IFAG Hardware Accessories Technology Co., Ltd.
Add to Cart
Bimetallic boundary
JF-800 bimetal bearing (universal type) Product parameters
| Product Name: | Sliding Bush Bimetal Bearing |
| Widely Used In: | Logistics Machinery |
| Max.Speed: | 2.5m/s |
| Color: | Customized |
| Type: | Universal Type |
| Feature: | Good Heat Transfer |
| Friction Factor: | 0.05~0.12 |
| Model: | JF-800 |
Substrate properties
Sintered lead-containing copper alloy layer material on steel substrate, suitable for oil lubrication application conditions, high load capacity and good fatigue resistance, widely used in automotive industry compressors, transmission systems, engineering machinery roller bushings, support Pulley bushing, tensioner bushing, balance bushing for automobile, steel bushing, knuckle main bushing, connecting rod bushing, valve rocker bushing, camshaft bushing, differential bushing, Thrust washer, plunger pump side piece, gear pump side piece, etc.
Material organization
1. Copper alloy sintered layer: It has good wear resistance and excellent load-bearing capacity, low friction factor and good anti-seizure performance.
2. Carbon steel substrate: Provide bearing capacity and good heat transfer.
Technical Parameters
| Bearer | Static bearing | 250N/mm | Alloy hardness | HB 60-100 | |
| Dynamic bearer | 140N/mm | ||||
| Operating temperature | -40℃~+250℃ | ||||
| Friction factor | 0.05~0.12 | ||||
| Line speed (lubrication) | Max.Speed | 2.5m/s | Thermal Conductivity | 60W(m*k)-1 | |
| PV (lubrication) | Max.PV | 2.8N/mm*m/s | |||
| Shear strength | Shear strength | 170N/mm | |||
| Thermal expansion coefficient | 14*10-6K-1 | ||||
typical application
JF-800 bimetal bearing (universal type) is mainly used in medium-load medium-speed oil lubrication or grease lubrication. Typical applications include engine connecting rods, pin shafts, engineering machinery chassis rollers, carrier rollers, guide wheels, hydraulic cylinder guide sleeves, oil earrings, logistics machinery, and agricultural machinery. Since the sintered copper alloy layer contains lead, the use of this product under certain conditions will be limited according to relevant laws and regulations.